有载调压变压器

产品分类

联系我们

北京恒安源电气设备有限公司


热线:400-028-9001  

电话:010-87572077 

传真:010-87572033

网址:www.haydq.com

地址:北京市朝阳区朝阳路8号


SBH15型油浸式非晶合金变压器

您的当前位置: 首 页 >> 产品中心 >> 非晶合金变压器

SBH15型油浸式非晶合金变压器

  • 所属分类:非晶合金变压器

  • 点击次数:
  • 发布日期:2019/02/26
  • 规格:
  • 类型:
  • 在线询价
  • 详细介绍
产品概述 Overview

       
         S(B)H15-M型密封式非晶合金电力变压器,该产品是充油密封型。原理同密封型电力变压器。非晶合金的基础元素是铁、镍、钴、硅、硼、碳等组成。是一种向同性的软磁材料,磁化功率小,不存在阻碍畴壁移动的结构缺陷,厚度极薄,只有0.027mm,填充系数相应变小,只有0.75~0.8,电阻率很高,是硅钢板的3~6倍,硬度是硅钢片的5倍,非晶合金材料对应力特别敏感

        S(B)H15-M sealed amorphous alloy power transformer, this product is oil-filled and sealed. The principle is the same as the sealed power transformer. The basic elements of amorphous alloys are iron, nickel, cobalt, silicon, boron, carbon and the like. Is a kind of isotropic soft magnetic material, the magnetization power is small, there is no structural defect that hinders the movement of the domain wall, the thickness is extremely thin, only 0.027 mm, the filling coefficient is correspondingly small, only 0.75~0.8, the resistivity is very high, it is silicon steel The plate is 3 to 6 times harder and has a hardness five times that of a silicon steel sheet. The amorphous alloy material is particularly sensitive to stress.

产品展示 Display

三相干式变压器

型号含义 Meaning

     

SBH15-M型油浸式非晶合金变压器型号表示含义


产品特点 Characteristics


            1、S(B)H15-M系列非晶合金变压器空载损耗比S13系列降低57%,比S11系列降低64%,比S9系列降低72%,负载损耗相比普通油浸式变压器降低5%,产品更节能。
          2、高压绕组用铜线,低压绕组用铜线或铜箔绕制,机械强度高,局部放电小。
          3、变压器联结组采用Dyn11,减少谐波对电网的影响,改善供电质量。
          4、变压器箱体采用全密封结构,延长使用寿命,免维护。
          5、变压器采用真空注油,完全排除线圈中的气泡,确保绝缘性能的稳定。
          6、每台变压器出厂前都进行峰值电压符合国家标准的全波雷电冲击试验,确保变压器完全可靠运行。


            1. The load loss of S(B)H15-M series amorphous alloy transformer is 57% lower than that of S13 series, 64% lower than S11 series, 72% lower than S9 series, and the load loss is reduced by 5% compared with ordinary oil-immersed transformer. The product is more energy efficient.

           2. Copper wire for high voltage winding, copper wire or copper foil for low voltage winding, high mechanical strength and small partial discharge.
           3. The transformer connection group adopts Dyn11 to reduce the influence of harmonics on the power grid and improve the power supply quality.
           4. The transformer box adopts a fully sealed structure to extend the service life and maintenance-free.
           5. The transformer adopts vacuum oil injection to completely eliminate the air bubbles in the coil to ensure the stability of the insulation performance.
           6. Each transformer is subjected to full-wave lightning impulse test with peak voltage in line with national standards before leaving the factory to ensure complete and reliable operation of the transformer.

结构特点 Structure


          铁芯:全部采用非晶合金带材卷制而成,空载损耗低、抗短路能力强、结构先进、节能、环保优势明显,符合我国政府倡导的"节约资源、保护环境、建设节约型社会"产业政策。是目前节能效果比较理想的配电变压器。
         线圈:采用优质QQ漆包圆铜线,无氧铜杆拉制的扁铜钱或铜箔绕制而成,其形式有圆筒式、连续式、新型螺旋式、分裂式等,具有足够的电气强度、机械强度和散热能力。
         油箱:采用优质钢板焊接而成,有椭圆型、矩型等结构,散热元件采用片式散热器、膨胀散热器或波纹油箱,油箱在厂内进行可靠的密封试验,内外表面经酸洗、磷化处理后,进行三底一面油漆暇涂,既抗腐蚀又美观大方。


        Iron core: all made of amorphous alloy strip, with low no-load loss, strong short-circuit resistance, advanced structure, energy saving and environmental protection. It is in line with the government's promotion of "saving resources, protecting the environment and building a conservation-oriented society." "Industrial policy. It is a distribution transformer with ideal energy saving effect.

        Coil: It is made of high-quality QQ lacquered round copper wire, and is made of flat copper or copper foil drawn by oxygen-free copper rod. The form is cylindrical, continuous, new spiral, split type, etc., with sufficient electrical strength. , mechanical strength and heat dissipation.
        Oil tank: welded by high-quality steel plate, with elliptical and rectangular structures. The heat dissipating component adopts chip radiator, expansion radiator or corrugated oil tank. The fuel tank is reliably sealed in the factory. The inner and outer surfaces are pickled and phosphorus. After the treatment, the three bottoms are painted on one side, which is both corrosion resistant and elegant.

产品用料 Materials


材料名称
Component
材质
Material
产地及质量特点
Place of origin and Characteristics
硅钢片
Silicon steel sheet
全新优质晶粒取向高导磁冷轧硅钢片
New high quality grain oriented high permeability magnetic cold rolled silicon steel sheet
       产地:武钢或新日铁。激磁电流、铁损耗、饱和参数性能优越。冷轧硅钢带由于具有较高的导磁系数和较低的损耗,因此用来制作变压器具有体积小、重量轻、效率高的优势。热轧硅钢带则逊色于冷轧硅钢带,而二次片、拼接片等对变压器使用寿命危害就更不用说了。
   Origin: WISCO or Nippon Steel. Excitation current, iron loss, and saturation parameters are superior. Cold-rolled silicon steel strips have the advantages of small size, light weight and high efficiency due to their high magnetic permeability and low loss. Hot-rolled silicon steel strips are inferior to cold-rolled silicon steel strips, and secondary sheets, splices, etc. are not harmful to the service life of transformers.
变压器绕组
Transformer winding
紫铜
Copper
       产地:洛阳铜业。含铜量99.999%,国家规定:电工用铜纯度必须在99.5%以上的紫铜。黄铜可用在小功率非电力变压器上,且属于不合格违规使用。另用黄铜做变压器线圈会增加铜损(负载损耗),降低变压器使用功率等,是十分有害的。
       Origin: Luoyang Copper. The copper content is 99.999%, and the state stipulates that the copper purity of the electrician must be 99.5% or more. Brass can be used on low-power non-power transformers and is a non-conforming violation. Another use of brass as a transformer coil will increase copper loss (load loss) and reduce the power used by the transformer. It is very harmful.
母排
Busbar
绝缘油
Insulating oil
环烷基矿物油
Cycloalkyl mineral oil
       产地:新疆克拉玛依油田。清洁而透明的液体,不得有沉淀物、机械杂质悬浮物及棉絮状物质。劣质油或二次油存在加速变压器老化,噪音大、易短路烧毁,使用寿命短。
       Origin: Xinjiang Karamay Oilfield. Clean and transparent liquids must be free of deposits, suspended solids of mechanical impurities and cotton-like materials. Inferior oil or secondary oil exists to accelerate the aging of the transformer, the noise is large, the short circuit is easy to burn, and the service life is short.
绝缘纸
Insulating paper
牛皮纸/NOMEX 绝缘纸
Kraft paper / NOMEX insulation paper
       产地:许昌绝缘材料厂或美国杜邦公司。绝缘纸是变压器的重要组成部分,变压器老化、烧坏的主要原因之一是使用低价劣质绝缘纸,易发生电弧击穿,缩短了使用寿命。
       Origin: Xuchang Insulation Material Factory or DuPont Company of the United States. Insulation paper is an important part of the transformer. One of the main reasons for the aging and burning of the transformer is the use of low-cost inferior insulating paper, which is prone to arc breakdown and shortens the service life.
环氧树脂
Epoxy resin
高环氧值(>40)6101环氧树脂
igh epoxy value (>40) 6101 epoxy resin
       产地:瑞士汽巴嘉吉。F/H级蕞高耐温155℃/180℃。耐温、耐压、硬度、收缩率、吸水率、玻化温度、粘接强度、拉伸强度等技术指标对干式变压器绝缘、浇注质量非常关键。
       Origin: Swiss Ciba Cargill. The F/H grade has a maximum temperature resistance of 155 ° C / 180 ° C. Technical indexes such as temperature resistance, pressure resistance, hardness, shrinkage, water absorption, glass transition temperature, bonding strength and tensile strength are critical to the insulation and casting quality of dry-type transformers.
电工木
Electrician wood
榉树木
Eucalyptus
       产地:东南亚、内蒙古,由南方机车厂、内蒙古阿里河电厂提供,绝缘能力强,抗张强度高。
       Origin: Southeast Asia, Inner Mongolia, provided by Southern Locomotive Works and Inner Mongolia Alihe Power Plant, with strong insulation and high tensile strength.


执行标准 Standard

         
          1、IEC60076-1:1993 电力变压器
          2、GB1094.1-1996 电力变压器
          3、GB6451-2008 油浸式电力变压器技术参数和要求
          4、JB/T10088-2004 6KV~500KV级电力变压器声级

           5、JB/T10318-2002 油浸式非晶合金铁芯配电变压器技术参数和要求

          1. IEC60076-1:1993 Power Transformer
          2. GB1094.1-1996 power transformer
          3. GB6451-2008 oil immersed power transformer technical parameters and requirements
          4. JB/T10088-2004 6KV~500KV class power transformer sound level
             5. JB/T10318-2002 Technical parameters and requirements for oil-immersed amorphous alloy iron core distribution transformer

使用条件 Conditions

          1、蕞高环境温度:+40℃
         2、蕞低环境温度:-25℃
         3、海拔高度:<1500m
         4、蕞高月平均相对湿度:90%(20℃)
         5、安装地点:安装在没有火灾、爆炸危险、严重污秽、化学腐蚀及剧烈震动的场所,户内或户外。

         1. the highest ambient temperature: +40 ° C
         2. the minimum ambient temperature: -25 ° C
         3. Altitude: <1500m
         4. the highest monthly average relative humidity: 90% (20 ° C)
         5. Installation location: Installed in a place without fire, explosion hazard, serious pollution, chemical corrosion and severe vibration, indoors or outdoors.

技术参数  Parameters
变压器型号
Transformer Type
电压组合 Voltage Combination联结组别
Connection Group
短路阻抗
Short- circuit Impedance
损耗(W) Loss空载电流
No-load current
(%)
产品报价
Quotation
高压
HV
分接范围
Tap Range
低压
LV
空载
No-load Loss
负载
Load Loss
S(B)H15-M-30/10-0.411 
10.5 
10
6.3
6
±5%

±2×2.5%
0.4
0.69
Yyn0

Dyn11
4%306001.60获取产品价格 Get Price
S(B)H15-M-50/10-0.4439101.52获取产品价格 Get Price
S(B)H15-M-63/10-0.45010901.44获取产品价格 Get Price
S(B)H15-M-80/10-0.46013101.36获取产品价格 Get Price
S(B)H15-M-100/10-0.47515801.24获取产品价格 Get Price
S(B)H15-M-125/10-0.48518901.16获取产品价格 Get Price
S(B)H15-M-160/10-0.410021301.04获取产品价格 Get Price
S(B)H15-M-200/10-0.412027300.96获取产品价格 Get Price
S(B)H15-M-250/10-0.414032000.88获取产品价格 Get Price
S(B)H15-M-315/10-0.417038300.80获取产品价格 Get Price
S(B)H15-M-400/10-0.420045200.80获取产品价格 Get Price
S(B)H15-M-500/10-0.424054100.72获取产品价格 Get Price
S(B)H15-M-630/10-0.44.5%32062000.64获取产品价格 Get Price
S(B)H15-M-800/10-0.438075000.56 获取产品价格 Get Price
S(B)H15-M-1000/10-0.4450103000.48获取产品价格 Get Price
S(B)H15-M-1250/10-0.453012000 0.48 获取产品价格 Get Price
S(B)H15-M-1600/10-0.4630145000.48获取产品价格 Get Price
S(B)H15-M-2000/10-0.4720178200.40获取产品价格 Get Price
S(B)H15-M-2500/10-0.4800207000.32获取产品价格 Get Price
注:以上参数仅供参考,具体以实际为准。我公司不断对产品进行优化设计,如有改动,恕不另行通知,解释权归北京恒安源电气设备有限公司所有!
Note: The above parameters are for reference only, which is subject to actual conditions. Our company continuously optimizes the design of the products, and if there are any changes without prior notice, the right of interpretation belongs to Beijing Henganyuan Electrical Equipment Co., Ltd.!


安装尺寸 Size


变压器型号
Transformer Type
外形尺寸(mm)
Dimensions
安装轨距(mm)
Installation Gauge
重量(Kg)
Weight
S(B)H15-M-30/10-0.4645*460*660400*400265
S(B)H15-M-50/10-0.4690*460*710400*400300
S(B)H15-M-63/10-0.4810*460*790500*400395
S(B)H15-M-80/10-0.4830*460*880500*400485
S(B)H15-M-100/10-0.4910*800*925550*740575
S(B)H15-M-125/10-0.4910*800*955550*740620
S(B)H15-M-160/10-0.4910*800*1000550*740650
S(B)H15-M-200/10-0.4940*900*1090550*820900
S(B)H15-M-250/10-0.4980*900*1160550*8201020
S(B)H15-M-315/10-0.41020*900*1235550*8201280
S(B)H15-M-400/10-0.41030*900*1260550*8201450
S(B)H15-M-500/10-0.41140*890*1315660*8201560
S(B)H15-M-630/10-0.41210*890*1250660*8201650
S(B)H15-M-800/10-0.41350*890*1350820*8201970
S(B)H15-M-1000/10-0.41380*890*1350820*8202170
S(B)H15-M-1250/10-0.41425*890*1430820*8202750
S(B)H15-M-1600/10-0.41420*1100*1680820*10203200
S(B)H15-M-2000/10-0.41540*1200*17351070*11203710
S(B)H15-M-2500/10-0.41550*1200*19051070*11204460
注:以上参数仅供参考,具体以实际为准。我公司不断对产品进行优化设计,如有改动,恕不另行通知,解释权归北京恒安源电气设备有限公司所有!
Note: The above parameters are for reference only, which is subject to actual conditions. Our company continuously optimizes the design of the products, and if there are any changes without prior notice, the right of interpretation belongs to Beijing Henganyuan Electrical Equipment Co., Ltd.!

订货须知 Order

        1、产品型号
  2、额定容量(kVA),三绕组变压器高、中、低压绕组容量比(%)
  3、高压额定电压(kV),调压方式,级数及分接电压百分比(%)
  4、中压额定电压(kV),调压方式,级数及分接电压百分比(%)
  5、低压额定电压(kV)
  6、短路阻抗(%)
  7、联结组标号
  8、冷却方式
  9、特殊要求:如环境温度、海拔高度、相数、频率、有载分接开关、绝缘水平、环境要求。


      1. product model
      2.rated capacity (kVA), three-winding transformer high, medium and low voltage winding capacity ratio (%)
      3. high voltage rated voltage (kV), voltage regulation mode, number of stages and tap voltage percentage (%)
      4.the medium voltage rated voltage (kV), voltage regulation mode, the number of stages and the percentage of tapping voltage (%)
      5. low voltage rated voltage (kV)
      6.short circuit impedance (%)
      7. the junction group label
      8. cooling method
      9.special requirements: such as ambient temperature, altitude, phase number, frequency, on-load tap-changer, insulation level, environmental requirements.



本文网址:http://www.haydq.com/product/604.html

关键词:非晶合金变压器,油浸式变压器,SBH15变压器

最近浏览: